Work Health and Safety compliance on Australian industrial construction sites is not a box-ticking exercise that sits alongside project management. It’s a legal framework with specific obligations, significant penalties for non-compliance, and genuine consequences for workers when the obligations aren’t met. For project managers new to the principal contractor role on Australian industrial sites, understanding the WHS regulatory framework and the specific obligations it creates is foundational to managing the project safely and legally.
The Principal Contractor Obligation Under the WHS Act
Under the Work Health and Safety Act 2011, which applies in Queensland and most other Australian states and territories with minor jurisdictional variations, the principal contractor for a construction project has a primary duty of care to ensure, so far as is reasonably practicable, that the workplace and the work carried out at the workplace do not pose health and safety risks to workers and others. This duty doesn’t transfer to subcontractors. The principal contractor retains primary responsibility for the safety of the site, even for work performed by subcontractors.
In practice, this means the principal contractor must have a WHS management plan for the project, must ensure that all subcontractors have appropriate WHS management systems, must coordinate the WHS activities of all PCBUs on site, must consult with workers and their representatives on WHS matters, and must maintain the records required to demonstrate that these obligations have been met.
The Construction Work Coordinator Requirement
For construction projects meeting the definition of “construction work” under the WHS Regulations (which includes most industrial capital projects above a certain value), the WHS Regulations require the appointment of a Construction Work Coordinator who must ensure that a Safe Work Method Statement (SWMS) is prepared for all high risk construction work before that work commences. High risk construction work includes work in confined spaces, work at height above two metres, work involving the risk of falls from height, work on or near energised electrical installations, and work involving asbestos.
Every subcontractor performing high risk construction work must provide a compliant SWMS before they start work. The principal contractor must review the SWMS and confirm that it’s appropriate for the specific work and site conditions before approving it. A SWMS that’s a generic document not tailored to the specific site and task is not compliant under the WHS Regulations and doesn’t discharge the principal contractor’s obligation.
Notifiable Incidents and SafeWork Notification Requirements
The WHS Act requires the principal contractor to notify the relevant state regulator (SafeWork Queensland in Queensland, SafeWork NSW in New South Wales, etc.) immediately on becoming aware of a notifiable incident. A notifiable incident is the death of a person, a serious injury or illness, or a dangerous incident that exposes a person to serious risk. The obligation to notify is immediate and does not wait for an investigation to be completed.
Following a notifiable incident, the site or the specific area involved must be preserved to allow the regulator’s inspection, except to the extent necessary to attend to injured persons, make the area safe, or comply with a direction from the regulator. Understanding this obligation and having a clear incident response procedure that includes immediate regulator notification is part of the principal contractor’s preparation for any Australian industrial construction project.
Subcontractor Safety Pre-Qualification
The principal contractor’s duty of care extends to the safety management of its subcontractors. This means pre-qualifying subcontractors against WHS requirements before they’re engaged, not just after they’ve mobilised to site. Pre-qualification should verify that each subcontractor has a current WHS management system, has appropriate workers compensation and public liability insurance, has a competency verification system for their workers, and has a satisfactory safety performance record from recent comparable projects.
PFI’s subcontractor pre-qualification process covers all of these requirements as a standard part of tender evaluation. Subcontractors who don’t meet the WHS pre-qualification criteria aren’t engaged regardless of their price competitiveness, because the cost of a safety incident on a PFI-managed project exceeds any procurement saving many times over.


Leave a Reply